Bulk-fill composite materials represent a modern group of composite systems, introduced into practice with the aim of overcoming the limitations of the conventional layer-by-layer technique. This review discusses their main characteristics, advantages, limitations, and clinical indications, as well as their place in modern dental practice. Due to their specific characteristics, they allow the achievement of healthy, aesthetic, and long-lasting restorations.
Akshay Langalia, Aastha Buch, Malhar Khamar, Parth Patel, Polymerization Shrinkage of Composite Resins: A Review Journal of Medical and Dental Science Research, Volume 2 Issue 10 (2015) pp: 23-27
Hampe T, Wiessner A, Frauendorf H, et al. Monomer Release from Dental Resins: The Current Status on Study Setup, Detection and Quantification for In Vitro Testing. Polymers (Basel). 2022;14(9):1790. Published 2022 Apr 27. doi:10.3390/polym14091790.
Meeker JD, Ehrlich S, Toth TL, et al. Semen quality and sperm DNA damage in relation to urinary bisphenol A among men from an infertility clinic. Reprod Toxicol. 2010;30(4):532-539. doi:10.1016/j.reprotox.2010.07.005
Ma X, Zhang X, Huang X, Liu F, He J, Mai S. Performance of low shrinkage Bis-EFMA based bulk-fill dental resin composites. Dent Mater. 2024;40(9):1378-1389. doi:10.1016/j.dental.2024.06.025
P. Frühwirt, A. Knoechl, M. Pillinger, S.M. Müller, P.T. Wasdin, R.C. Fischer, J. Radebner, A. Torvisco, N. Moszner, A.M. Kelterer, T. Griesser, G. Gescheidt, M. Haas, The chemistry of acylgermanes: triacylgermenolates represent valuable building blocks for the synthesis of a variety of germanium-based photoinitiatorsInorg. Chem., 59 (20) (2020), pp.15204-15217, 10.1021/acs.inorgchem.0c02181
Dalton Trans, Do germanium-based photoinitiators have the potential to replace the well-established acylphosphine oxides? 50 (36) (2021), pp. 12392-12398, 10.1039/d1dt02308j
Yu P., Yap A., Wang X. Y. Degree of Conversion and Polymerization Shrinkage of Bulk-Fill Resin-Based Composites. Oper Dent. 2017; 42 (1): 82-89.
Son S. A., Park J. K., Seo D. G., Ko C. C., Kwon Y. H. How light attenuation and filler content affect the microhardness and polymerization shrinkage and translucency of bulk-fill composites? Clin Oral Investig. 2017; 21 (2): 559-565.
Ilie N., Fleming G. J. In vitro comparison of polymerisation kinetics and the micro- mechanical properties of low and high viscosity giomers and RBC materials. J Dent. 2015; 43 (7): 814-822.
Sezinando A., Luque-Martinez I., Muñoz M. A., Reis A., Loguercio A. D., Perdigão J. Influence of a hydrophobic resin coating on the immediate and 6-month dentin bonding of three universal adhesives. Dent Mater. 2015; 31 (10): e236-246.
Lee Y. K. Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites. Dent Mater. 2008
Leprince J. G., Palin W. M., Vanacker J., Sabbagh J., Devaux J., Leloup G. Physico- mechanical characteristics of commercially available bulk-fill composites. J Dent. 2014; 42 (8): 993-1000.
Goracci C., Cadenaro M., Fontanive L., Giangrosso G., Juloski J., Vichi A., Ferrari F. Polymerization efficiency and flexural strength of low-stress restorative composites. Dent Mater. 2014; 30 (6): 688-694.
Li X., Pongprueksa P., Van Meerbeek B., De Munck J. Curing profile of bulk-fill resin-based composites. J Dent. 2015
Bucuta S., Ilie N. Light transmittance and micro-mechanical properties of bulk fill vs. conventional resin based composites. Clin Oral Investig. 2014
Leprince J. G., Palin W. M., Vanacker J., Sabbagh J., Devaux J., Leloup G. Physico- mechanical characteristics of commercially available bulk-fill composites. J Dent. 2014
Vianna-de-Pinho M.G., Rego G.F., Vidal M.L., Alonso R.C.B., Schneider L.F.J., Cavalcante L.M. Clinical Time Required and Internal Adaptation in Cavities restored with Bulk-fill Composites. J. Contemp. Dent. Pract. 2017;18:1107–1111. doi: 10.5005/jp-journals-10024-2184.
Guerra L, Ramos RQ, Linhares LA, et al. Fracture Load of Molars Restored with Bulk-fill, Flowable Bulk-fill, and Conventional Resin Composite After Simulated Chewing. Oper Dent. 2023;48(3):294-303. doi:10.2341/21-203-L.
Yildirim T, Ayar MK, Akdag MS, Yesilyurt C. Radiopacity of bulk fill flowable resin composite materials. Niger J Clin Pract. 2017;20(2):200-204. doi:10.4103/1119-3077.178919
Puckett A, Fitchie J, Smith J. The effect of incremental versus bulk fill techniques on the microleakage of composite resin using a glass-ionomer liner. Oper Dent. 1992; 17(5):186-191.
Corral Núñez, C.; Vildósola Grez, P.; Bersezio Miranda, C.; Alves Dos Campos, E.; Fernández Godoy, E. State of the art of bulk-fill resin-based composites: A review. Rev. Fac. Odontol. 2015, 27, 177–196. [Google Scholar] [CrossRef]
Alshabib A, Silikas N, Algamaiah H, Alayad AS, Alawaji R, Almogbel S, Aldosari A, Alhotan A. Effect of Fibres on Physico-Mechanical Properties of Bulk-Fill Resin Composites. Polymers. 2023; 15(16):3452. https://doi.org/10.3390/polym15163452
Rong Wang, Hang Liu, Yong Wang, Different depth-related polymerization kinetics of dual-cure, bulk-fill composites, Dental Materials, Volume 35, Issue 8, August 2019, Pages 1095-1103, https://doi.org/10.1016/j.dental.2019.05.001
Soares, B.M., Barbosa, M.P., de Almeida, R.V. et al. Marginal integrity and physicomechanical properties of a thermoviscous and regular bulk-fill resin composites. Clin Oral Invest 28, 496 (2024). https://doi.org/10.1007/s00784-024-05887-w
Veloso SRM, Lemos CAA, de Moraes SLD, do Egito Vasconcelos BC, Pellizzer EP, de Melo Monteiro GQ. Clinical performance of bulk-fill and conventional resin composite restorations in posterior teeth: a systematic review and meta-analysis. Clin Oral Investig. 2019;23(1):221-233.doi:10.1007/s00784-018-2429-7
Arbildo-Vega, H.I.; Lapinska, B.; Panda, S.; Lamas-Lara, C.; Khan, A.S.; Lukomska-Szymanska, M. Clinical Effectiveness of Bulk-Fill and Conventional Resin Composite Restorations: Systematic Review and Meta-Analysis. Polymers 2020, 12, 1786. https://doi.org/10.3390/polym12081786
